Herutu TW-820T, Instruction Manual

Page: 11 / 24

TW-820T
8
4.Name and Function of Each Part
①
Main body case Main body case. POM, a highly durable material, is used.
②
Battery cap Lid for fixing the coin battery (CR2032).
③ Monitor LED
(green/red/yellow/orange)
An LED for communication confirmation/battery check. It lights up/blinks
green/red/yellow/orange according to the communication result.
④ Test switch
(Pairing switch)
Used for testing wireless communication or for pairing.
⑤ Harness connecting connector
Connector for connecting the supplied harness connector with limit
switch.
A wireless signal is transmitted by the work completion signal input (No-
voltage contact input) to the connector.
⑥ Main body mounting hole
Mounting hole for fixing the main body to a Pokayoke tool. Two mounting
holes are provided. Use M4 screws to fix the main body.
⑦
Nameplate label
Nameplate label of the product. Model No. and serial No. are indicated on
the label.
Serial No. on the label represents the ID No. of the transmitter.