Herutu TW-510T, Instruction Manual

Page: 19 / 32

13
7.Operational methods
7.Operation methods
7-1.To test the Transmitter
・
Push the Test switch of Transmitter using the edge of ball-point pen.
(LED is lit on Battery check window and data for one shot is transmitted.
）
・
Verify the Transmitter for LED lighting conditions through the Battery check
window.
・
If LED blinks or does not light on during Test switch being pressed, replace
the battery (CR2032).
・
The battery should be checked not only before operation but also after use.
・
Checking the operation(Output, Buzzer sound) of Receiver allows you to
confirm the communication status.
Check LED for lighting.
Push here with the ball-point-pen.