28
2-2-7 Setting the Plan
S
et a planned quantity, except there normally is no need to make this setting. It is simply
intended to preset a correct planned quantity in case there may occur an error in the planned
quantity for some reason or other.
For the types 5** and *5*, press the [1] and [2] keys respectively to set the planned quantity.
(1) Press the [1] key. The resulting display is as follows (for the type 5**):
(2) Input a planned quantity.
<e.g.> For 1800, input [1][8][0][0].
(3) If you press the [ENT] key after this, the value you input will be set as the planned
quantity. If you have inadvertently set a wrong data, press the [CLR] key and re-input
the correct data.
If the Plan is changed, the Advancement and Accomplishment rate will be automatically
changed based on the Actual.
When choosing the operation type which includes target of display
「
Plan
」「
Advancement
」
「
Accomplishment rate
」
can’t be set any more. (The case of setting “1”)
1
The command No. is displayed for about
0.75 seconds.
↓
*
*
*
*
The currently set data
1
8
0
0
The value input
