21
2-2-4 Setting the Working hour
Set the working hours of your choice. The machine calculates the planned production
quantity at the present based on the set working hours and tact to compute the advancement
relative to the production actual.
Since the machine is designed to have up to six types of working hours, determine which
working pattern No. of working hours will be set with the command [6], before proceeding to
set the working hours.
Note that this setting is unavailable when the
“Working hour: Not used” is set in function
settings.
Suppose you have the following working hours in mind:
Start―8:00――10:00……10:10――12:00……13:00――15:00……15:15――17:30……
Working Rest Working Rest Working Rest Working Rest
17:45――19:50……20:00――22:00……23:00―― 1:00……1:15――3:30―End
Working Rest Working Rest Working Rest Working Working
(1) Press the [5] key. The resulting display is as follows:
* The number of times represents the current input position (00-40) and corresponds
to “No. of times” in “Working Hours Worksheet” on the last page of this manual.
(2) Set 8:00. Press the keys [8][0][0].
If you have inadvertently set a wrong data, you may either press the [CLR] key and redo
inputting or just overwrite it with the correct 4-digit data. (In this case, [0][8][0][0])
5
The command No. is displayed for about
0.75 seconds.
↓
*
*.
*
*
The currently set time (hours./minutes)
0
0
The number of times (00)
8.
0
0
The value input
0
0
