11
2-1-1 Setting an operation type
The machine is so designed that a setting can be made from among seven operation types.
When using the machine with any operation type other than the type 123
(Target/Actual/Advancement), affix the attached command sticker onto the case.
Display items
[1] Target:
The target production quantity of the day (fixed
value).
[2] Actual:
The production quantity up to the present time.
[3] Advancement:
The degree of advancement relative to the
planned production quantity at the present
time.
[4] Accomplishment rate:
The rate of accomplishment to the planned
production quantity at the present time.
[5] Plan:
The planned production quantity at the present
time (changes over time).
[6] Tact:
The time required for production per product
(shown in seconds).
Operation type
Description
*123
Target/Actual/Advancement
523
Plan/Actual/Advancement
124
Target/Actual/Accomplishment rate
524
Plan/Actual/Accomplishment rate
152
Target/Plan/Actual
126
Target/Actual/Tact
526
Plan/Actual/Tact
* Default values
<How to set>
(1) On the function settings screen, press the [1] key on the keyboard.
The currently set operation type appears a
fter the sub command “C1” is displayed for
0.75 seconds.
F
1
［
Function settings screen
］
C
1
The sub command is
displayed.
*
*
*
The set operation type
appears.
