9
Chapter 2 How to Use
2-1 Function settings
Before using the machine, you need to make settings for the following items. Read the
description carefully and make suitable settings for your intended application.
Setting an operation type
Select an item shown on the display of the machine to set a desired operation type.
For an operation type, you may make a choice from among the seven patterns in all by a
combination of
“Target,” “Actual,” “Advancement,” “Accomplishment rate,” “Plan,” and “Tact.”
Setting use or no use of the Working hour
When the Working hour is used, the machine calculates the planned quantity based on the
registered data of working hours.
When the Working hour is not used, the machine calculates the planned quantity based on
ON/OFF of external input signals.
Setting the stop input logic
Set “Positive” or “Negative” for the logic of a stop input signal.
The resulting operation (operating/stop) differs depending on whether the Working hour is set
to be used or not used.
Setting
Terminal input
Working
hours
Stop input logic
ON
OFF
Used
Negative
Stop
Operating
Positive
Operating
Stop
Not used
Negative
Operating
Stop
Positive
Stop
Operating
■
Setting use or no use of the function which the planned
quantity
stop at Target.
Setting use or no use of the function which the planned
quantity calculation
stop, when the
planned quantity reached target.
When choosing the operation type which includes target of display
“Plan“,
“Advancement“ and “Accomplishment rate“ can’t be set any more.
(The case of setting “1”)
