Herutu 21UD, Instruction Manual, Page: 57 / 84

21UD
49
Basic operation
6-7. Setting the Pre-scale Key [8]
Set the pre-scale here. The pre-scale function includes the multiple number setting and
batch number setting. Once either [Multiple number] or [Batch number] is selected in the
Function settings, this function is enabled. If neither of [Multiple number] nor [Batch
number] is selected in the Function settings, this function is disabled, thus [8] key cannot
be selected.
(Multiple number setting)
It allows the multiplied content, which is set for actual input/subtraction input, to go
up/down. Up/Down by means of [
▲
]/[
▼
] key allows increasing/decreasing one by one
point regardless of any pre-scale set values.
(Batch number setting)
Once the Batch number set for actual input/subtraction input is reached, the numeric
value goes up or down one by one point. The actual input and subtraction input, which do
not exceed the Batch number, are memorized into this machine, however, if they are
cleared, the memorized contents will be erased. Up/Down by means of [
▲
]/[
▼
] key allows
increasing/decreasing one by one point regardless of any pre-scale set values.
To carry out the Multiple number setting [Multiple number]:
①
Press [8] key.
8
←
Display about 0.75seconds
↓
＊ ＊ ＊ ＊ ＊ ←
present data
②
Input the Multiple number to be set.
<e.g.> To set
“120”, input [1] [2] and [0] in this order.
If you have inadvertently set a wrong data, press [CLR] key and input once again.
1 2 0