Herutu 21D-429C, Instruction Manual

Page: 30 / 76

21D-429C
22
5-10. Setting the pre-scale Command [8]
Set the pre-scale function.
Selective
No.
Contents
0 Pre-scale function is disabled.
1
The Pre-scale function is set to
“Multiple number”.
Set the pre-scale value with [8] key in normal screen.
2
The Pre-scale function is set to
“Batch number”.
Set the pre-scale value with [8] key in normal screen.
*It cannot be used together with the tact reserve function.
①
Select [8] key and then press [ENT] key, and Pre-scale function setting screen appears.
If there is no need to change the setting contents, press [ENT] key to return to the
Command selection screen.
②
Input optional numeric value within 0-2.
③
Here, press [ENT] key to set the pre-scale, and Command selection screen comes back.
If you have inadvertently pressed wrong pre-scale no, press [CLR] key to return to the
status of
①
or overwrite the correct pre-scale no to modify.
Function settings
Ｐｒｅ－ｓｃａｌｅ ［０］＝Ｎ
（０－２） ［ ］＝
[Pre-scale setting screen]
Ｐｒｅ－ｓｃａｌｅ ［０］＝Ｎ
（０－２） ［１］＝Ｍ
[ Pre-scale setting screen]
Pre-scale selection:
0
→
none
1
→
Multiple(Multiple number)
：Ｍ
2
→
Batch(Batch number)
：Ｂ