Herutu 21D-429C, Instruction Manual

Page: 24 / 76

21D-429C
16
Function settings
5-4. Setting the operation type Command [2]
Set the operation type.
Selective
value
Types Numeric notation Alphabetical notation
[0] Target/Actual/Advancement 123 YJS
[1] Plan/Actual/Advancement 523 KJS
[2] Target/Actual/Accomplishment rate 124 YJT
[3] Plan/Actual/Accomplishment rate 524 KJT
[4] Target/Plan/Actual 152 YKJ
[5] Target/Plan/Actual/Advancement 1523 YKJS
[6]
Target/Plan/Actual/Accomplishment
rate
1524 YKJT
①
Select [2] key and press [ENT] key, and type setting screen appears.
If there is no need to change the setting contents, press [ENT] key to get back to the
Command selection screen.
②
Input optional numeric value within 0-6.
<e.g.>To set the type 5(1523), input [5].
③
If [+] key is pressed, type notation changes into alphabetical notation.
If [+] key is pressed once more, type notation changes into numeric notation.
④
Here, press [ENT] to set the type, and Command selection screen comes back.
If you have inadvertently press a wrong type No, press [CLR] key to get back to the
status of
①
or overwrite the correct No to modify.
Ｔｙｐｅ ［ ］＝１２３
（０－６） ［ ］＝
[Type setting screen]
Ｔｙｐｅ ［ ］＝１２３
（０－６） ［ ］＝１５２３
[Type setting screen]
Type setting range:0-6