Optical fiber
socket type
Look for a socket for
optical fiber. Insert
the white fiber cable
into the socket circled
in red.
Modem Set-up Instruction
Optical fiber cable
Power cable
(Hero v6plus)
5/10/2018
1
Automatic Installation
On-site Installation
No particular settings are required for IPv6 Internet connection.
IPv6 Internet service will usually become available within 2-3 hours to up to 6
hours after the installation. (*It may take up to 24 hours during system
maintenance. )
If you want to start using the Internet before IPv6 signal is recieved, please
follow the instruction for “How to setup IPv4 ID and password” on page 3.
●
●
●
Please make sure that the NTT modem is
plugged in to the optical fiber jack and the
power cable, and the modem is turned on
after the installation is completed.
●
Please make sure to plug in the NTT modem
to the optical fiber jack and power cable
before automatic installation.
●