www.heroninstruments.com
H.0IL
and
Sm.0IL
Interface & Static Levels
Operating and Maintenance Instructions
Figure 2
To remove the probe you will need a 1
/2”
and 9/1
6” wrench. Use the wrenches to fully
loosen the nut closest to the link and gently
separate the link from the probe. Care must be
taken to avoid breaking/pinching the wires
while removing or replacing the probe. Make
sure connections are tight.
Item
Part Numbers
H.0IL Electronic Panel
3202
Sm.0IL Electronic Panel
3203
H.0IL Probe
3200
Sm.0IL Probe
3201
Ground Lead
3208
Thumb Screws Set (2)
3250
Figure 1
Battery Box
Thumb Screws (Keep Tight*)
Thumb Screws (Keep Tight*)
Start Button
Buzzer
Signal LED:
Water =
Oil =
ON:
On =
Low battery =
Made in Canada
HERON INSTRUMENTS INC.
447 Moxley Road, Dundas, ON L9H 5E2 CANADA
1-800-331-2032 or 905-628-4999
Please visit our website
www.heroninstruments.com
for more information on the complete
Heron
product line.
HERON ALSO MANUFACTURES:
• Water Level Meters
• Data Loggers
• Conductivity Meters
• Temperature Meters
• Well Casing Indicators
• Well Depth Indicators
• Tag Lines
• Vertical Inspection Cameras
IMPORTANT
: ENSURE THAT THE P
ANEL RETAINING THUMB SCREWS
(NUTS
) ARE TIGHT BEFORE USE*
* not applicable for Sm.0IL
Operating and Maintenance Instructions Inside
Figure 3
Hanger
to support the meter at the well head.
Tape Guide
to protect the tape from sharp
edges.
