HermanMiller Setu Table Installation Download Page 1

Z

© 2013 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® 

Y

Z

, Action Office, and Mirra 2 are among the registered trademarks of Herman MIller, Inc.

TM

 Sense, Setu, Be Collection and Sayl are among the trademarks of Herman Miller, Inc. 

Illustrations and specifications are based on the latest product information available at the time of publication. 
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products. 

Part no. 1b9rtx rev C.

1

Y

Setu

  Table Installation

Parts Included:

Table Top

A

Tools Required:

Power Driver

7/8” Hex Socket

Torque Wrench

#2 Phillips Bit

Hardware Pack

Pan Head Tapping 
Screw (4)

Spider

Column

Draw Rod

Anti-Rotation Cap

Lock Washer

F

C

D

E

G

H

Base Assembly

B

Summary of Contents for Setu Table

Page 1: ...based on the latest product information available at the time of publication The right is reserved to make changes in design and specifications at any time without notice and also to discontinue products Part no 1b9rtx rev C 1 Y Setu Table Installation Parts Included Table Top A Tools Required Power Driver 7 8 Hex Socket Torque Wrench 2 Phillips Bit Hardware Pack Pan Head Tapping Screw 4 Spider Co...

Page 2: ...of publication The right is reserved to make changes in design and specifications at any time without notice and also to discontinue products Part no 1b9rtx rev C 2 1 Align Mounting holes in Spider C with holes in Table Top A 2 Install 4 Pan Head Tapping Screws F Notice If Spider comes mounted to 2 boards remove Screws and Boards Dispose of properly Do not use these screws to mount Spider to Table...

Page 3: ...latest product information available at the time of publication The right is reserved to make changes in design and specifications at any time without notice and also to discontinue products Part no 1b9rtx rev C 3 6 Align Anti rotation Cap G with Notches in Base Place into position on Base Slot Notch Notch 5 Place Base B onto Column while aligning Slots in Column with Notches in Base B G 4 Positio...

Page 4: ...ction and Sayl are among the trademarks of Herman Miller Inc Illustrations and specifications are based on the latest product information available at the time of publication The right is reserved to make changes in design and specifications at any time without notice and also to discontinue products Part no 1b9rtx rev C 4 7 Tighten Draw Rod to 450 550 in lbs 50 62 Nm H G ...

Reviews: