Once you hear two clicks, release
the buttons.
z
Motia Sit-to-Stand Tables
Adjustment Guide
1
z
Motia
™
Sit-to-Stand Tables
Y
Simple Touch Switch Adjustment Guide
How to adjust the height of the table
How to clear a lower or upper height limit
How to calibrate the table
Calibrate at installation so legs are in sync or if legs become out of sync
during operation.
Press and hold the up arrow to
raise the table.
Raise or lower the table to one
of the saved height limits.
Adjust the table to the lowest height.
Once you hear one click,
release the buttons.
The table will begin to readjust itself
if necessary. Release the button once
the table has stopped moving and
clicking. Listen carefully; the clicks
are quiet.
Press and hold the down arrow
to lower the table.
Press and hold the up and down
arrows at the same time until you
hear one click (10–15 seconds).
Press the down arrow again and
hold for 5–10 seconds.
How to save a lower and upper height limit
Raise or lower the table to
desired height.
Press and hold the up and down
arrows at the same time until you hear
two quiet clicks (10–15 seconds).
