manualshive.com logo in svg

HermanMiller Embody 100210688, Manual

Share
Download
HermanMiller Embody 100210688 Manual Download Page 82

©

2008 Herman Miller, Inc., Zeeland, Michigan  Printed in U.S.A.

™

L

, 

Z

, 

Y

, Embody, are trademarks of Herman Miller, Inc.

 

 Illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make  

         changes in design and specifications at any time, without notice, and also to discontinue products.

1B4YHV REV A

Embody

™

Rear Tilt Cover Replacement

PARTS INCLUDED:

TOOLS REQUIRED:

1

Rear Tilt Cover

 

2

3

         

Flat Blade
Screwdrive

Slide flat blade screwdriver along side of rear 
tilt cover and pry off.

NOTE: 

Back, Seat, Arms and Front Tilt Cover do 

not need to be removed for Rear Tilt Cover 
replacement.  Items not shown for clarity.

Rotate back of rear tilt cover up and pull off.

Set front of new rear tilt cover onto bushings 
in pivot assembly.  Press down on back of 
cover making sure clips fully engage into slots 
in tilt. 

Bushing

Clip

Summary of Contents for Embody 100210688

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands