manualshive.com logo in svg

HermanMiller Embody 100210688, Manual

Share
Download
HermanMiller Embody 100210688 Manual Download Page 50

©

2000 Herman Miller, Inc., Zeeland, Michigan  Printed in U.S.A.

®        Action Office, Aeron, Ambi,Arrio, Beirise Collection, Co/Struc, Custom Choices, Eames, Equa, Equa 2, Ergon 2, Ergon 3, Ethospace, E-wall

Hollington, Liaison, Meridian, Newhouse Group, Passage, Pellicle, Phoenix, Proper, Radian, Relay, Scooter, Super Room, Systems Bridge,   

           and V-wall are registered trademarks of Herman Miller, Inc.
™

L

, 

Z

, 

Y

, Caper, Burdick Group, Chadwick, Flex-Edge, Florence, ID, Kiva, Levity, Milafin,  Potomac, Prospects, Q, Raleigh, 

          Reaction, Red, Resolve, SQA, and Traverse are trademarks of Herman Miller, Inc.

 Illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make  

         changes in design and specifications at any time, without notice, and also to discontinue products.

1B4YJ2 REV A

Embody

™

 Arm Pad Assembly Replacement

PARTS INCLUDED:

TOOLS REQUIRED:

1

2. Replace with new arm pad.  

    

   

  

   
  

BACK SCREWS 

     

 

   

     

T-20 Torx Driver

1. Remove front and back screws.

2

ARM PAD

3. Re-install screws. Do not overtighten.  

    Torc specs 15 in/lbs.

T-20 Torx Driver

Torque wrench with in-lbs
indicator

Right Arm Pad

Left Arm Pad

4. Repeat process for other arm pad.  

Summary of Contents for Embody 100210688

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands