Z
© 2015 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
®
Y
,
Z
, Caper are among the registered trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b9rtf rev A.
8
Footring Disassembly:
1. Invert chair on padded
corner of table top.
2. Hold base and pull hard
to remove caster from base.
4. Lift the base from
pneumatic cylinder and pull
off.
3. Using a 7/8” dia socket, or
something equivalent, strike
socket to dislodge the base
from the cylinder.
Y
Caper
®
Disassembly for Recycling Instructions
Footring Disassembly
