430-535 0104 © 2004 Heritage MedCall, Inc.
1
SENTRY
INSTALLATION
& SERVICE
POWER SUPPLY UNIT
INSTRUCTIONS
Model HM-535
IMPORTANT SAFETY INSTRUCTIONS
WARNING
- When using electrical devices, basic safety precautions should be followed
to reduce the risk of fire, electrical shock, or injury.
1.
READ ALL INSTRUCTIONS BEFORE INSTALLING THIS POWER SUPPLY.
2.
This device must be grounded. Connect only to a properly grounded outlet.
3.
Install or locate this power supply only in accordance with the installation instructions
provided.
4.
Use this power supply only for its intended use as a Sentry system component.
5.
Do not use an extension cord with this device. If a receptacle is not available
adjacent to the power supply, contact a qualified electrician to have one properly
installed.
6.
This power supply should be serviced only by a qualified service personnel. Contact
nearest Sentry authorized service facility for examination, repair or adjustment.
7.
The installation of this device must be in accordance with instructions and all
applicable local codes and requirements.
8.
High Voltage connections inside. Operate only with the door closed. Disconnect
supply voltage when servicing.
9.
Adequate ventilation is essential. Install in strict accordance with mounting
instructions.
10.
For continued protection from lightning damage, never connect an output wire to
earth ground.
C A U T I O N
To reduce the risk of electrical shock, Do Not remove cover.
Refer servicing to qualified service personnel.
N O T I C E
Indoor use only. Protect this equipment from water damage.
Never operate where water can make contact to the enclosure or interior.
