manualshive.com logo in svg

Hercules Cargo 1000, Operating Instructions Manual, Page: 139 / 228

Share
Download
Hercules Cargo 1000 Operating Instructions Manual Download Page 139

034-11572_1.0_29.08.2018

137

Operation

7.10.2.1

Folding the stem, version II

Alternative

Open the 

clamping lever on the stem quick release

.

Push the 

unlocking knob

.

Pivot the 

handlebars

 90° to the right or left.

You feel the 

handlebars

 click into place.

Close the 

clamping lever on the stem quick release

.

Figure 62:

Stem, version II with clamping lever on the stem quick release (1) 
and unlocking knob (2)

7.10.2.2

Pushing in the seat post

Open the 

clamping lever for the quick release on the 

seat post

.

Push in the 

saddle

 to the minimum position.

Close the 

clamping lever for the quick release on the 

seat post

.

1

2

EN_034-11572_1.0_09.18_HERCULES BOSCH_Inhalt.book  Page 137  Wednesday, August 29, 2018  6:21 PM

Summary of Contents for Cargo 1000





































































































































































































































Reviews:

No comments