BTP02
4/12 – User Manual
2.
USING THE SPEAKER
2.1.
Positioning the speaker
Indoors, the sound quality of the Hercules wireless speaker will vary according to its
placement in the room.
If you will be moving the speaker from room to room indoors, please keep the following
points in mind:
•
To obtain the best possible sound, place the speaker on a shelf, a piece of furniture, a
desk or any other flat surface at a height of between 70 and 120 cm from the floor.
•
You should ideally position the speaker near a wall, to enhance the bass response.
The further you position your speaker from the wall, the lower the bass level will be.
•
When in operation, you should always position the speaker on its base: any other
position will result in reduced sound quality.
•
Do not place the speaker in a narrow, enclosed space, as doing so will result in
reduced sound quality.
Outdoors, sound dispersion is greater and will result in reduced sound quality. To mitigate
the sound dispersion, place the speaker close to you.
2.2.
Pairing a Bluetooth® device
"Pairing" means connecting a smartphone or a Bluetooth® device to your speaker, in order
to establish a communication. When two devices are paired, the relevant information is
stored in both devices' memory. Once a device has been paired with the speaker, it doesn't
need to be paired again.
The speaker can store information about up to 8 devices.
Step 1
: Turn the speaker on, if you haven't already done so.
The Bluetooth® pairing indicator light should flash quickly. This means that the speaker is
in pairing mode.
If the pairing indicator light doesn’t flash, please refer to section 3, further in this manual.
