Heras sGate Trackless, User Manual

Page: 19 / 66

EN – Translation of the original user manual - 3.0 | 2018
19
manual is not followed or functional faults have arisen as a result of wilful damage,
every form of guarantee lapses.
Depending on the version, we recommend the following:
•
Bottom guided : 6 months or 25,000 cycles
•
Top guided : 6 months or 50,000 cycles
•
Trackless : 6 months or 50,000 cycles
During maintenance, essential points of the gate must be periodically checked
based on an inspection protocol:
• Correct operations and adjustment.
• Check all anchor and bolted connections.
•
Check for wear of the guide wheels and the running surface/groove
•
Check welded joints, damage to coating and zinc
•
Check for damage and the operation of detection loops, safety edges and
photocells
.
7.2
CLEANING
The gate and the outside of the drive unit cabinet can be cleaned using a non-
aggressive detergent and a soft cloth, brush or sponge. Avoid using a pressure
cleaner as this might damage the gate and the drive unit.
DECOMMISSIONING AND REMOVAL 8
Ensure that the gate is dismantled by a qualified technician.
Disconnect the electricity supply in a safe way from the drive unit.
Use the installation manual.
At the end of their service lives the products must be disposed of in accordance
with all local, regional and national rules and instructions. The guideposts are made
of steel. Heras is also happy to take the products back and then dispose of them in
an appropriate manner.