Heras HMD Basic, User Manual

Page: 28 / 88

EN – Translation of the original user manual - 2.0 | 2019 28
This menu item can be activated by briefly pressing the selection switch, taking
the user one menu level deeper into the service menu:
Again, this menu item is activated by pressing the selection switch, taking the
user to the password input field:
The displayed value can be changed by rotating the knob. Turning the knob
faster, causes the values to change more quickly.
Pressing the switch saves the value that has been set in this way; the previous
menu item is once again displayed:
If the correct password has been entered (not: 33333), the menu items and
inputs that were previously hidden can be selected immediately. A valid password
remains active for 10 minutes and then automatically resets to the value 33333.
If any number other than a correct password is set, this number remains saved
and is not reset to the value 33333 after 10 minutes.
It is possible to directly select the main menu item
at any time by holding down the selection switch for 2 seconds from within the
menu entries. When this menu item is confirmed the control system software
resets the program and returns to the active operating mode.
5.5 MENU OVERVIEW
The menu system of the HMD24 control system offers the following options
(overview):
1. Identification

Full version Program versions installed

Gate version Control system variant

Serial number Individual serial number of the control system and
PAN

Motor controller Program version of the motor controller

Peri.controller Program version of the periphery controller
Service access
1 Password input
Password input
Value: 3xxxx
Service access
1 Password input
Main menu
END