Heras HGD230, User Manual

Page: 38 / 146

EN – Translation of the original user manual - 2.1 | 2019 38
Examples for the proactive view
• Immediately after switching on the controller, the display briefly appears
message "250 ProgramInit" to let you know that the controller has been
started correctly.
• When the control unit is switched off, the message "224 FU Span.Fhl"
appears briefly when the power supply fails, before the display goes out.
• If some special inputs are activated for a longer time (than usual), the
reference is also displayed:For example, if the Stop button is active for
more than 2 seconds, "161 Immediate stop" is displayed.
5.5.5 Selecting the menu system
The HMD230 menu system is accessed by pressing the twist and selector switch
for approx. 2 seconds while the operating mode is displayed. The display then
shows the text "Main menu".
Illustration 22: Display of main menu on the LCD screen
Turn the selector switch to select the individual menu options and then press the
switch to activate the selected option. The first menu option in a menu level
always brings you back one level, "Back in menu". The "Exit main menu" option in
the main menu closes the menu display and restarts the control software.
5.5.6 Menu system
Many control functions of the HMD230 are achieved through parameters that are
stored in the device and that can be changed. These parameters are loaded into
the motor drive during the manufacturing process and they provide the specific
behavior of a defined gate. The user or installer of the gate motor drive can
access many of these parameters via the menu system.
5.5.7 Entering the password
How to select menu options and how to navigate for entering the password are
demonstrated here, starting from the operating modes display. The display