Hensel-Visit COPY ONE, User Manual

Page: 15 / 24

Bedienungsanleitung Copy One
Hensel-Visit GmbH & Co. KG 15
Mounting to Lamp Support
Please note: For the mounting onto a lamp support you need the optional
lamp support holders (code no. 99565002 ), see chapter “Accessories”
on page 19.
WARNING Danger of bruising
When opening the locking screws you are in danger
of bruising your hands and fingers.

When opening the screw of the tilting bracket,
hold the flash unit with the other hand to avert
unwanted motion.
Locking screw of the lamp bracket
connector

Loosen the locking screw of
the lamp bracket connector,
put it on the thread of the
lamp bracket and tighten the
locking screw again.
Locking screw of the holders for
the lamp support
Lamp support

Loosen the locking screws of
both holders and slide the
openings onto the lamp
support.

Tighten the locking screws of
the holders.