Error messages
43
Error messages
Problem
Possible cause(s)
Remedy
Device beeps –
temperature error
The model light turns
off, the fan runs at
maximum speed and the
device does not release
a flash.
High ambient -
temperature at full
model light, unsuitable
light shaping tool,
covered ventilation slots
or defective fan.
Keep the device
switched on so that
the fan can cool down
the device.
Make sure the
ventilation slots are
not covered.
Make sure the fan is
not defective.
Display for the indication
of flash energy flashes
The maximum recycling
time has been exceeded,
e.g. because the flash
tube has an afterglow.
Switch off the device
immediately.
Send the device to
Customer Service.
Summary of Contents for Certo 200
Page 56: ......
