Henny Penny Wendy's Evolution Elite EEG-251, Operator'S Manual

Page: 21 / 90

Installation
9
2 2..1 10 0 M Mo otto orr B Be ea arriin ng gss
The electric motor bearings are permanently lubricated. Do not lubricate.
2 2..1 11 1 L Liig gh httiin ng g & & S Sh hu uttd do ow wn n O Off B Bu urrn ne errss
2 2..1 11 1..1 1 L Liig gh httiin ng g B Bu urrn ne errss
1 1))
Turn the power switch to the off position.
2 2))
Wait at least 5 minutes and then turn power switch to the on position.
3 3))
Press either heat button on the control.
4 4))
The burner lights and operates n a Melt Cycle until the shortening reaches a
preset temperature.
5 5))
Once the display shows a product selection or a double dash, press the desired
product button. NOTE: The fryer is equipped with a ignition spark module which
has a set ignition safety time (TSA) of 90 seconds.
2 2..1 11 1..2 2 S Sh hu uttd do ow wn n B Bu urrn ne errss
1 1))
Press either heat button on the control.
2 2))
Turn the power switch to the off position. NOTE: This turn off all vats.
2 2..1 12 2 T Te essttiin ng g T Th he e F Frryye err
Each Henny Penny open fryer was completely checked and tested prior to shipment.
However, it is good practice to check the unit for proper operation.
Figure 2-1 Side Dimensions
NOTE: Side dimensions are the same for all units.
2-13 Dimensions