Henny Penny Velocity OXE-100, Operation Manuals

Page: 35 / 118

Oil
Maintenance
23
M Me en nu u ((ssccrre ee en n)) 1 1 M Me en nu u ((ssccrre ee en n)) 2 2 M Me en nu u ((ssccrre ee en n)) 3 3 M Me en nu u ((ssccrre ee en n)) 4 4
5 5..3 3..2 2 Q Qu uiicckk F Fiilltte err
The 1. QUICK option allows operators to perform a quick filter of the oil on-demand. A quick filter
runs automatically after every cook cycle. During the filtering cycle the oil does not fully drain. It
maintains a constant level during filtering. Arrows pointing up and down with a sequence of tracing
light displays.
1 1.. Select 1. QUICK FILTER. A confirm prompt displays. If
the operator selects:
• NO x, the display returns to the previous menu.
• √ YES, the drain opens automatically and the oil begins
filtering.
After a few moments, the drain closes and the oil returns
to the vat. When the vat is close to full, the control panel
chirps and a display timer starts counting down.
If the unit does not detect the oil returning to the vat and
displays IS POT FILLED?, check the oil level to confirm
the vat is full.
If the oil is:
• Level with the hot fill line on the back of the vat, press √
YES.
• Not level with the hot fill line on the back of the vat, press
NO x. The filter pump motor runs for an additional 30
seconds and pumps oil from the drain pan.
5 5..3 3..3 3 D Da aiillyy F Fiilltte err
The 2. DAILY option allows operators to perform a daily filter of the oil and a wash cycle if desired.
This filter cycle drains the oil from the vat completely enabling the user to clean the crumbs out of the
vat and wash then down the drain. The crumb catcher in the drain pan holds the debris and the filter
cleans the oil.