1. Press and hold and buttons until LEVEL - 1 shows in the display, followed by ENTER CODE.
2. Enter code 1, 2, 3, 4. “PRODUCT” and “SELECTN” show in the displays.
3. Press
√√√√√
button and ‘SELECT PRODUCT’ and “-P 1-” show in the displays.
4. and buttons scrolls through the 40 products, or press the desired product button
5. Press
√√√√√
button and the product shows in the left display and “MODIFY”, and “YES NO” shows in the
right display. Press
√√√√√
button to change this product, or press
X
button to choose another product.
6. If
√√√√√
button was pressed, use the product buttons to enter product name. Once the desired letter shows in
the display, press button to continue to the next letter.
7. Once name is complete, press button and “COOK TIME” shows in the display. Use the product
buttons to change the time in minutes and seconds, to a maximum of 59:59.
8. Press button and “TEMP” shows in the display. Press the product buttons to change the
temperature. The temperature range is 190°F (88°C) to 380°F (193°C).
9. Press button and “COOK ID” shows in the display. Enter abbreviated product name (Ex: NUG)
10. Press button and “DUTY 1” shows in the display. Press the product buttons to set an alarm.
11. Press button and “DUTY 2” shows in the display, and a second alarm can be programmed.
12. Press button and QUAL TMR shows in the display. Press product buttons to set holding time.
13. Press button and “AIF DISABLE” shows in the display and “YES” or “NO”. Using and
buttons change the display to “YES” if that product is to not be included in the automatic intermittent
filtration operation, or “NO” if it is to be included.
14. Press button and“ASSIGN BTN” shows in the display, along with the product (ex: NUGGETS). If
this product already has a product button assigned to it, that LED will be lit. To assign other product
buttons to that product, press and hold the product button for 3 seconds and that LED stays lit. To remove
a product from a button, press and hold the product button with a lit LED and the LED goes out.
15. To program another product, press
X
button and ‘SELECT PRODUCT’ shows in display. Continue with
step 3 above.
16. Press
X
button 3 times to end programming.
Adding a New Product to the Menu
3-14-08
FM07-284-A
