Installation 23
5 Installation
Consult Technical Data on page 63 for the specifications of the machine.
Before installing the machine, carefully read the safety instructions in Safety on page 8.
Failure to follow or disregard of the safety instructions may result in serious injury.
5.1 Transportation and Installation
The machine must be moved and transported in an upright position.
The machine may not be transported using a crane. The machine may be transported with a forklift
provided it is still on the pallet packaging.
Moving the machine on wheels on uneven surfaces may lead to loss of stability of the machine.
Always move the machine slowly and carefully.
1.
Place the machine on a flat, level surface. This is essential to ensure a trouble-free operation
of the machine.
Do not position machines with plastic covers in the vicinity of a heat source.
Make sure there is sufficient space (at least 50 cm) around the machine to ensure a
proper ventilation.
2.
Ensure the brakes of the machine are activated.
3.
Verify that the machine housing is present and correctly fitted.
5.2 Connecting the Machine
1.
Make sure the voltage stated on the machine plate matches the mains voltage.
2.
Fit the correct plug on the cable in accordance with local legislation and connection data. See
Technical Data on page 63.
3.
Fit the connecting cable to the machine. See Technical Data on page 63.
4.
Connect the machine to a grounded wall outlet to avoid fire or electric shock (the earth
connection is green/yellow).
The power cable must be free at all times, and nothing may be placed on it.
Immediately replace the power cable if damaged.
5.
Check the correct direction of rotation of the three-phase model pump. See Figure 6: Direction
of Rotation of the Vacuum Pump on page 24.