background image

16 

 

11 

Warranty

 

 

Henkel expressly warrants that all products referred to in this Instruction Manual for Loctite

®

 

EQ RC32 Automatic Reservior SP 

(hereafter called “Products”) shall be free from defects in 

materials and workmanship. Liability for Henkel shall be limited, as its option, to replacing 

those Products which are shown to be defective in either materials or workmanship or to 

credit the purchaser the amount of the purchase price thereof (plus freight and insurance 

charges paid therefor by the user). The p

urchaser’s sole and exclusive remedy for breach of 

warranty shall be such replacement or credit.

 

 

A claim of defect in materials or workmanship in any Products shall be allowed only when it 

is submitted in writing within one month after discovery of the defect or after the time the 

defect should reasonably have been discovered and in any event, within (12) months after 

the delivery of the Products to the purchaser.  This warranty does not apply to perishable 

items, such as fuses, filters, lights, etc.. No such claim shall be allowed in respect of products 

which have been neglected or improperly stored, transported, handled, installed, connected, 

operated, used or maintained. In the event of unauthorized modification of the Products 

including, where products, parts or attachments for use in connection with the Products are 

available from Henkel, the use of products, parts or attachments which are not manufactured 

by Henkel, no claim shall be allowed. 

 

No Products shall be returned to Henkel for any reason without  prior written approval from 

Henkel. Products shall be returned freight prepaid, in accordance with instructions from 

Henkel. 

 

NO WARRANTY IS EXTENDED TO ANY EQUIPMENT WHICH HAS BEEN ALTERED, 

MISUSED, NEGLECTED, OR DAMAGED BY ACCIDENT.   

 

EXCEPT FOR THE EXPRESS WARRANTY CONTAINED IN THIS SECTION, HENKEL MAKES 

NO WARRANTY OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, WITH RESPECT TO 

THE PRODUCTS. 

 

ALL WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND 

OTHER WARRANTIES OF WHATEVER KIND (INCLUDING AGAINST PATENT OR 

TRADEMARK INFRINGEMENT) ARE HEREBY DISCLAIMED BY HENKEL AND WAIVED BY 

THE PURCHASER. 

 

Summary of Contents for 2814023



















Reviews: