HemoCue 201 DM Reference Manual Download Page 54

Page: 54 / 203

New

Cuvette Batch

Cuvette batch:

123456789

Expiration Date:

Save?

Save

08/09/03

FIGURE 3-18

g) Press Save to store the information or

press No to cancel.

h) The updated Cuvette Batch list will be

displayed. Press the Confirm button in
this display to return to the Define List
menu (see

FIGURE 3-5

Delete Cuvette Batch Information

Cuvette

Batches

123456789

234567891

345678912

456789123

567891234

Delete

Add

FIGURE 3-19

a) To choose the Cuvette Batch information

that is to be deleted, highlight the
Cuvette Batch No. (1) by pressing the
Scroll Bar Arrows (2). Press the Delete
button (3).

b) A confirm dialogue is displayed. Press

Delete to delete the Cuvette Batch or
press No to cancel.

c) The updated Cuvette Batch list will be

displayed. Press the Confirm button in
this display to return to the Define List
menu (see

FIGURE 3-5

1  Cuvette Batch (to be deleted)
2  Scroll bar arrows
3  Delete button

Summary of Contents for 201 DM












































































































































































































Search results

Summary of Contents for 201 DM

Reviews:

Related manuals for 201 DM

Brands by name

Popular brands

HemoCue 201 DM, Reference Manual

Search results

Summary of Contents for 201 DM

Reviews:

Related manuals for 201 DM

Brands by name

Popular brands