HemoCue 201 DM, Reference Manual

Page: 103 / 203

98
3.5 Default Settings
FIGURE 3-82
When the Default Settings button is pressed
in the Settings menu (see
FIGURE 3-4 ),
confirmation or cancellation of the
requested change to the Analyzer default
setting is required. A question will be
displayed.
Default settings affect only the Analyzer
configuration (including password).
Measurement results or lists (Liquid Controls,
Cuvette Batches, Operators, Comments or
Logs) will not be affected. For a list of default
values see
Appendix A Default Settings .
a) If all the settings in the Analyzer are to be
changed to Default settings, press
Continue.
Otherwise, press No.
FIGURE 3-4 will be
displayed.
If the choice was to change all settings to
default, the following text will be displayed
for a few seconds:
Settings have Now Changed to Default
Settings
.
b) The Settings menu, FIGURE 3-4 , will be
displayed again.
Default
Settings
No No
Continue Continue
Are You Sure You
Want to Change to
Default Settings?
All current settings
will be changed