Maintenance
Maintenance guidelines
To protect your unit from overheating and other types of damage:
• Use only a power source and connection appropriate for this unit, as indicated on the marking labeland back plate.
• If an extension cord or power strip is used, be sure that the cord or strip is rated for the product. Also, be sure that the
total ampere ratings of all products plugged into the extension cord or power strip donot exceed 80% of the extension
cord or power strip ampere ratings limit.
• Do not overload an electrical outlet, power strip, or convenience receptacle. The overall system load must not exceed
80% of the branch circuit rating. If power strips are used, do not allow the load to exceed 80% of the power strip input
rating.
• Install the unit near an outlet that you can reach easily. Disconnect the unit by grasping the plug firmlyand pulling it
from the outlet. Do not disconnect the plug by pulling the cord.
• Disconnect the unit from the wall before cleaning. Do not use liquid or aerosol cleaners.
• Slots and openings in the monitor are provided for ventilation. These openings must not be blocked or covered. Do not
push objects of any kind into these slots or openings.
• Do not drop the unit or place it on an unstable surface.
• Do not allow anything to rest on the power cord. Do not step on the cord.
• Keep the unit in a well-ventilated area, away from excessive light, heat, and moisture. Keep the monitor away from
high-capacity transformers, electric motors, and other strong magnetic fields.
• Do not attempt to service this product yourself. Adjust only those controls that are covered by the operating
instructions. If the unit is not operating properly or has been dropped or damaged, contact your HPE authorized
dealer, reseller, or service provider.
Cleaning the monitor
Procedure
1. Turn off and unplug the unit.
2. Dust the panel by wiping the screen with a soft, clean cloth.
If the screen requires additional cleaning, use any anti-static LCD screen cleaner.
CAUTION: Do not use benzene, thinner, ammonia, or any volatile substance to clean the monitor screen or
cabinet. These chemicals might damage the monitor. Never use water to clean an LCD screen.
Maintenance
18