Removing the HPE 1U Console Rails
Procedure
1. Locate the spring release.
2. Place your hand on the outside of the HPE 1U Console Rails so that you can move the spring release.
3. Gently move the spring release toward the inside of the rack (callout 1) while moving the HPE 1U Console Rails
(callout 2).
NOTE: If you cannot gain access to the spring release from the outside of the HPE 1U Console Rails, a tool might be
required to unlock the spring release from the inside of the HPE 1U Console Rails.
Front
Rear
4. Repeat the steps 1 to 3 for the other HPE 1U Console Rail.
Installation
13