ZEUS X Series
4-CH Power Amplifiers with Crossover
17
7.5. BRIDGE MODE CH3 LINK CH1
CH1
ON
OFF
CH 3
CH 1
2+
1+
2+
1+
1+
2-
2+
1-
If the switch CH3 LINK CH1 is in ON position you can configure the amplifier with
1 input and 2 outputs. In this case CH1 must be the input. Please connect the
outputs as shown above.
8. RACK MOUNTING AND DIMENSIONS
Use four screws and washers to mount the amplifier to the equipment rack rails.
To use the amplifier outside a rack, attach the self-adhesive rubber feet to the
bottom.
In the applications where the rack assembly may be moved, we strongly recom
-
mend supporting the rear of the amplifier. Optional rack handles provide finger
grips at each end, making lifting and setting into the rack more comfortable.