8
Sensitivity adjustment
: long press “ ” or “ ” to enter the sensitivity
adjustment. It can be switched between S1 and S2 (S1: input 500mV, S2:
input 1000mV).
5.5. AUX Out
This device can be used as a audio source output to other amplifier
devices. When the AUX OUT interface is connected to other devices and
one pf the audio sources (FM\USB\SD\AUX IN\BT) is selected for play-
back, the audio signal will be routed to these devices through this AUX
OUT, and play synchronously.
5.6. BT Connection
NOTE: Before using this operative mode for the first time,
you need to pair your HWA-20 PLAY to your BT device. To
do that:
•
Press on your HWA-20 PLAY unit “
M
” key and choose
BT
mode. If
there is no paired device, the BT logo will flicker.
•
On your BT device, open the BT setting page and search for
HELVIA
device. Default password is “
0000
”. If pairing procedure
successful, the BT logo will be always on. Now you can play your
playlist.
Connection:
Pairing procedure has to be run only the first time you
connect a certain Bluetooth device to the HWA-20 PLAY. After it, you just
need to press “
M
” button on the amp (or remote control), choose
BT
mode, and the unit will automatically connect to your BT device.
Volume adjustment
: short press
” or “
” to increase or reduce
current volume.