25
360093-1/H
Preparing the monitoring system on i.Series incubators
To change date and time information
1
Access the CONFIGURATION screen.
a
From the HOME screen, press the MAIN button. The MAIN screen appears.
b
Use the buttons to navigate to and select the Edit Configuration option. You are prompted to enter
your password.
c
Enter your password. If the password is correct, the CONFIGURATION screen appears with the
first option highlighted.
2
From the CONFIGURATION screen, use the buttons to navigate to and select the Set Date & Time
option. The SET DATE & TIME screen appears with the Date Format setting highlighted.
3
Press the DOWN button until the setting that you want to change is highlighted.
4
Press the INC or DEC button until the new value that you want to use appears.
5
To change other settings on this screen, repeat steps 3-4.
6
Press the BACK button to return to the previous screen, or press the HOME button to return to the
HOME screen. The setting is saved.
4.3.3
Changing the temperature units
NOTE:
A password is needed to complete this task. For more information about the
password, see Section 4.6, “Changing the password.”
You can change the measurement system used to display the temperature. The default units set by the
factory is Celsius (°C). Available options are Celsius or Fahrenheit (°F).
To change the temperature units
1
Access the CONFIGURATION screen.
a
From the HOME screen, press the MAIN button. The MAIN screen appears.
b
Use the buttons to navigate to and select the Edit Configuration option. You are prompted to enter
your password.
c
Enter your password. If the password is correct, the CONFIGURATION screen appears with the
first option highlighted.
2
From the CONFIGURATION screen, use the buttons to navigate to and select the System Options
option. The SYSTEM OPTIONS screen appears with the Language setting highlighted.
3
Press the DOWN button until the Temperature Units setting is highlighted.
4
Press the INC or DEC button until the units that you want to use appears.
5
Press the BACK button to return to the previous screen, or press the HOME button to return to the
HOME screen. The setting is saved.
