Temperature Setpoint
The Temperature Setpoint specifies the desired temperature for product stored inside the unit.
Change temperature setpoint
Touch the
minus (-) or plus (+) on the spin box to adjust the temperature setpoint.
Alarm Settings
Parameters for activating an alarm may be set through Alarm Settings.
Set alarm parameters
1. Touch the
Alarm Settings
button.
2.
Touch the minus (-) or plus (+) on the corresponding
Setpoint
spin box to change an alarm setpoint.
3. Touch the minus (-) or plus (+) on the corresponding
Time Delay
spin box to change the time delay duration.
Helmer Scientific
i.C
3
User Guide for i.Series Incubators
360406/A
29
