Operating Instructions • CPK hybrid • 11-2021 • v04 • 106-29004
HT Data Management
30
9 .8 .3 Loading parameter sets
f
Click on
Load from file
.
f
Select the file with the file ending “cpkpreset”.
f
In the window opened by the operating system,
click on the
Open
button.
;
The parameter sets are displayed in the overview
1
.
9 .8 .4 Editing parameter sets
f
Select the parameter set in the overview and click on
Edit
6
.
1
2
3
4
5
6
f
Allocate a three-digit designation, e.g. “016” to the
parameter set in the field
Designation
1
.
The same designation cannot be allocated twice.
f
Select the desired
Tension level
and
Quality
.
f
Select the type of binding mode in the drop-down menu
Mode
2
. The following settings are available:
• Force level
• Loop
f
Select the type of cutting mode in the drop-down menu
Cutting mode
3
. The following settings are available:
• Cut flush
• Cut with projecting cable-tie end
• No cutting
f
For delicate bundles, activate the option
Tensionfree
cutting
.
