Hella Gutmann SEG V, User Manual

Page: 120 / 1106

EN
Working with the Device
SEG V
Documented Test
20. Use the selection window to:
• finish the measurement
• finish the measurement and send it to the pen drive
• finish the measurement and send it per e-mail
NOTICE
The message Finish measurement and send it per e-mail is only indicated if the Wi-Fi
interface is configured.
21. Regard the window with information and instructions.
22. Finish the measurement with .
23. Abort the procedure with .
The data from the documented test are automatically saved in the Car History.
8.4.4 Managing Car History Entries
The Car History provides an extended search function according to a specific time period and it is also possible to send
and delete single or several entries.
Send and delete single or several entries by using the checkbox under Multiple selection: . The activated checkbox is
marked with green square inside it.
The second checkbox becomes visible after having activated the first checkbox. By activating the second checkbox you
are able to select or unselect already registered entries at the same time. A selected entry is marked with a green line.
Uncheck your selection by deactivating the second checkbox.
Open the Selection window with . Do the following here:
1. Perform measurements
Indicated only if an entry is selected
2. Send reports to pen drive
3. Send reports to e-mail address
4. Delete reports
5. Delete vehicle owner
All entries to the selected vehicles are displayed if you select one out of the points 2 to 5. In this menu the multiple
selection function is identical to the one in the previous menu.
NOTICE
Deletion processes cannot be undone.
8.4.5 Performing Documented Tests with Manually Created Vehicle
NOTICE
A documented test can only be done when the company data has been entered.
Proceed as follows to perform a documented test for a manually created vehicle:
1. Select >Documented test< in the main menu.
2. Observe the info window where necessary.
3. Confirm the info window with where necessary.
4. Choose to call up the Manually create vehicle option.
120