HELLA Aglaia Advanced People Sensor Installation And Configuration Manual Download Page 160

Page: 160 / 179

160 / 179

The reproduction, distribution and utilization of this document as well as the communication of its contents to others without

express authorization is prohibited. Offenders will be held liable for the payment of damages.

21.04.2020

Version 1.18.0

Appendix

APS-90, APS-180 and APS-90-Outdoor-PoE

View

Comment

Network Status

IP, Gateway, DNS, etc.

System Health Status

Uptime, CPU temperature, cause of last reboot,

etc.

Open Source Licenses

Information about used components in the firm-

ware

Contact Addresses

HELLA Aglaia contact data

Diagnostics

Counts

Live counting results

Monitored Zones

Live amount results

Tracked Object List Visualization Display options for tracked objects inside the

camera view

USB Video Recording

Record videos for developer issues

Camera view

Adjustable camera view

Logout

9.4

List of used IP ports

This list provides all network ports that are used by the APS. Most of them are needed

only with optional functions. Consult this list for your firewall and router configuration.

Establishing communication direction

−

➨

APS

APS as server listens on the corresponding port for incoming con-

nection requests.

−

APS

➨

APS as client requests a connection to the corresponding port of a

server.

−

➨

APS

➨

APS listens for and requests connections on the same port.

Use

Direction

Port

TCP/UDP Description

HTTP
(user interface)

➨

APS

configurable

TCP

Internal web server

Summary of Contents for Advanced People Sensor




















































































































































































Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands

HELLA Aglaia Advanced People Sensor, Installation And Configuration Manual

Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands