HELLA Aglaia Advanced People Sensor Installation And Configuration Manual Download Page 142

Page: 142 / 179

142 / 179

The reproduction, distribution and utilization of this document as well as the communication of its contents to others without

express authorization is prohibited. Offenders will be held liable for the payment of damages.

21.04.2020

Version 1.18.0

Configuration

APS-90, APS-180 and APS-90-Outdoor-PoE

6.14.4 System health status

Fig. 153: System Health Status
This information shows:

■

Operating time since last start.

■

Overall operating time.

■

Operating time since last firmware update.

■

Type of last system reset or reboot/restart.

■

Total number of system resets.

■

Number of system power-ups.

■

Number of hardware watchdog events.

■

Number of software watchdog events.

■

Number of unknown reset events.

■

Current CPU Temperature [°C] ; this is the temperature (°Celsius) inside the controller

on the mainboard.

6.14.5 Open Source Licenses

Fig. 154: List of open source licenses
License information about used open source components in the firmware 1.18.0.

Summary of Contents for Advanced People Sensor




















































































































































































Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands

HELLA Aglaia Advanced People Sensor, Installation And Configuration Manual

Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands