12
PVC Pipe 2” long (25) and 1” Ball Valve (16) are completely fit together and reference marks
are aligned per instruction #14 b.
17) Use plumbers tape (Teflon tape) when permanently assembling the 3/8” to1/2” barbed 90°
elbow fitting (22) to the
1” PVC Slip Reducer to ½” Threaded Female (21).
18) Glue the top end of the 1” PVC Flex Hose 16” long (23) into the fitting in the ladder.
19) Route the ½” Polypropylene Tubing (27) behind the 1” PVC Flex Hose 16” long (23)
as
shown in Figure 12 Detail C. Connect the ½” Polypropylene Tubing (27) to the small ball
valve attached to the top runway section by pushing the ½” Polypropylene Tubing (27) into
the end of the ball valve firmly as far as it will go. See Figure 13.
20) Secure the assemblies to the recessed area under the slide ladder by attaching the 1.5” PVC
Pipe Straps (14) with the #14 Pan Head Screws (11). See Figure 12 Detail A..
21) Secure the 1” PVC Flex Hose 68” long (24) in the hose recess under the ladder using the 1”
pipe Clamp (15) firmly pushing the 1” PVC Flex Hose 68” (24) into the 1” pipe Clamp (15).
(15)
(11)
Fig. 12
(25)
(24)
(23)
(20)
(21)
(22)
(11)
(14)
(16)
(27)
GLUE TO FITTING
IN LADDER (Step 18)
DETAIL C
(20)
(22)
(16)
(27)
PUSH INTO SMALL
BALL VALVE (Step 19)
