Helios AirPal Go 300 H, Installation And Operating Instructions Manual, Page: 29 / 48

Air purifier AirPal Go 300/600 H
Installation and Operating Instructions
EN EN
12
7�2 Control panel dimensions
7�3 Electrical data and technical characteristics
Below are detailed the following parameters: the electrical data of voltage, frequency, current, power, performance
(maximum airflow) and other interesting technical data such as rpm, noise level, application surfaces and minimum and
maximum use temperatures (Note the purifiers AirPal Go 300/600 H are 100% speed adjustable)
8�1 Maintenance
Regular maintenance of the air purifier AirPal Go 300/600 H is key to the units operation and effectiveness.
m
All maintenance, checking and repair of the equipment must be carried out by trained personnel�
The required safety / PPE measures (minimum mask & gloves) must always be taken to avoid any risk to the
user�
8�2 Filter shelf life
The shelf life of the two types of filter is dependent on the environment in which the AirPal Go 300/600 H is operating in:
-Clean environments (offices, hospitals, homes etc.) -Dirty environments (warehouses, industrial etc.)
Pre-filter ISO COARSE 65% (G4)
Clean environment: between 4 and 6 months / dirty environment: between 2 and 4 months
Absolute high efficiency filter HEPA H14
Clean environment: between 10 and 12 months / dirty environment: between 8 and 10 months
Fig�11
Phase Air purifier AirPal Go 300 H Air purifier AirPal Go 600 H
Rated voltage (V) 230 230
Rated voltage range (V) 220-240 220-240
Frequency (Hz) 50/60 50/60
Max. R.P.M. 3980 3600
Rated I (A) 230 V. 0,40 0,70
Rated power (W) 37 78
Rated airflow (m³/h) 300 600
Sound dB (A) (bei 1 m) 64 65
Min. ambient temperature (° C) -25 -25
Max. ambient temperature (° C) 50 50
CHAPTER 8
MAINTENANCE AND
SERVICE
m
WARNING