Heliocentris Energy Manager 1.3, Instruction Manual

Page: 47 / 78

Operating
Energy Manager 1.3 - Instruction Manual 47
5.1.11 Rectifier Submenu (Rect)
Menu item Display Description I/C
OpMode 1of the modes: Operating mode of the
rectifier. The mode is displayed
in the main menu if no error
occurred.
init Software module initializes. I
active Rectifier module is active. I
offline Rectifier module is offline. I
standby Rectifier module is available. I
error Rectifier module is in error
status. I
StateRpl 1 of the replies: State reply. System answer to a
user command (CMD).
init Software module initializes. I
run Rectifier module reports “Ready
for operating”. I
offline Rectifier module reports
request to switch to offline
operation mode as soon as
possible.
I
CMD One of the
commands:
Command to be entered by
user.
no command No command stands in queue. I+C
go online Start rectifier module C
go offline Stop rectifier module C
cancel command Cancel command in queue. C
Voltage x.x V Rectifier voltage I
Current x.x A Rectifier current I
Temp x.x °C Rectifier temperature I
Reset Counter* Reset operating counters. C*
Error List Number in
hexadecimal
format All active events are displayed
one after another with their
number and a short text. I+C
Legend:
*
Item is only displayed if the access level is service
I/C Information / Command
Table 5-11 Rectifier submenu