Getting Started
Energy Manager 1.3 - Instruction Manual
29
4.8
How to Install the Short Message Service
Wireless Remote Access and SMS are provided by a common GRPS/GSM
wireless access module. During the transmission of a text message, the
remote access is interrupted. After the successful transmission of a text
message, a new connection to the server is automatically created by the
wireless access module.
The following information is delivered by the SMS provider.
APN
User name and password
TIP
Installation of the Short Message Service can also be performed via
LAA.
To configure SMS on the control panel, proceed as follows:
1.
In the main menu, select
Configuration
.
2.
Select
System
and the
Modem
item
.
3.
Select
APN
and enter the APN as given by the SMS provider.
4.
Select
User
and enter the user name if necessary.
5.
Select
Pass
and enter the password if necessary.
6.
Confirm with
Save & Apply
.
The data is stored in the data base.
On the Energy Manager you insert the SIM card and connect the antenna
for the modem.
The SIM card must be able to send short messages
PIN must be deactivated
The PIN can be deactivated with a mobile phone.
Antenna cable for modem is installed
Connect antenna as follows:
Insert antenna connector to the antenna port on the front of the
Energy Manger.
Insert SIM card as follows:
1.
Insert SIM card into the slot of the card holder until it clicks into place.
2.
Table 3-1 LED modes of GPRS modem
