
58
V1.1
13.
Acquisition survey
13.1.
Arming
–
disarming
•
First check the Drone Box LED color, before mission:
Initialization, please wait and don’t move the
drone
Control before arming failed (check messages)
Autopilot ready, GNSS acquired
•
When GNSS is acquired (this step may take a few minutes), press the Drone Box
button, during 2 seconds. The LED color should turn to RED steady
•
The
Fox
6 is now ready to fly:
use the Radio Controller to ARM /DISARM
the
Fox
6 as
explained earlier in the chapter “
Fox
6 arming and disarming”. After the mission,
disarm the
Fox
6 by pressing the safety button on the top of the Drone Box again.
RED flashing LED shall be obtained.
Note that the mission logs are recorded as soon as the
Fox
6 is pre-armed. Recordings
stop when the Drone Box is disarmed.
Summary of Contents for Fox6
