background image

INTRODUCTION

Thank you for purchasing the Heli-Max AXE

 400 3D 

Rx-R Helicopter. We are certain you will get many hours of 
enjoyment out of this model. If you should have any questions 
or concerns, please feel free to contact us at:

[email protected].

For the latest technical updates or manual corrections to the AXE 
400 3D Rx-R, visit the Heli-Max web site at 

www.helimax-rc.

com

. Open the “Helicopters” link, and then select the 400 3D 

Rx-R. If there is new technical information or changes to this 
model, a “tech notice” box will appear in the upper left corner of 
the page. 

ITEMS THAT MUST BE

PURCHASED SEPARATELY

RADIO SYSTEM

Minimum 6-Channel Helicopter Radio

• FUTK6900 

Futaba

®

 6EX 6-Channel 2.4GHz Transmitter/

 Receiver
•  FUTK7005 Futaba 7C 7-Channel 2.4GHz Heli Tx/Rx
 No 

Servos

•  FUTK9251 Futaba 10C 10-Channel 2.4GHz Heli Tx/Rx
 Mode 

2

FLIGHT BATTERY

Hovering, Basic Aerobatics and 3D

•  GPMP0406 11.1V 2000mAh Battery LiPo Flight Battery
•  GPMP0617 Great Planes

®

 ElectriFly

 LiPo 11.1V

  2200mAh 25C Power Series

Hovering, Basic Aerobatics, Mild 3D and Aggressive 3D

•  GPMP0520 Great Planes LiPo 11.1V 2200mAh 25C
  T-Rex MX450 Heli
•  FPWP0327 FlightPower LiPo 11.1V 2170mAh 25C
  EVO25 3S Balance

Also required is an appropriate battery charger for your
fl ight battery.

WARNING: To prevent the possibility of the main 
rotors turning during set up, you must disconnect the 
main drive motor from the ESC or remove the pinion 
gear from the motor. Failure to do this may result 
in injury to yourself or damage to the model and its 
surroundings.

Summary of Contents for AXE 400 3D Rx-R

Page 1: ...io FUTK6900 Futaba 6EX 6 Channel 2 4GHz Transmitter Receiver FUTK7005 Futaba 7C 7 Channel 2 4GHz Heli Tx Rx No Servos FUTK9251 Futaba 10C 10 Channel 2 4GHz Heli Tx Rx Mode 2 FLIGHT BATTERY Hovering Basic Aerobatics and 3D GPMP0406 11 1V 2000mAh Battery LiPo Flight Battery GPMP0617 Great Planes ElectriFly LiPo 11 1V 2200mAh 25C Power Series Hovering Basic Aerobatics Mild 3D and Aggressive 3D GPMP05...

Page 2: ...tput to safe levels when the safe operating temperatures have been exceeded If this has occurred please allow the model 10 minutes to cool down WARNING The ESC does have a soft cut function that will reduce the power output to protect the flight battery Toward the end of a flight if you notice a slight power reduction land the model immediately and re charge the battery The flight time of the Axe ...

Page 3: ...the throttle stick to the middle position The servos blade grips and all the mixing levers should be perfectly level If necessary please make adjustments to the servo arms linkages or to the radio set up Linkage lengths are listed in the Heli Max Axe 400 RTF manual 3 Swashplate Type Futaba 6EX Futaba 7C Futaba 9C Futaba 10D Futaba 12 14 120 CCPM 3 S HR 3 HR 3 HR 3 HR 3 CCPM Elev CCPM All Servo Ser...

Page 4: ...il servo does not center when the transmitter stick is returned to center This is correct and how a heading hold gyro operates If the tail rotor servo always returns to center then you need to reverse the gyro gain channel in the transmitter BEFORE FLYING THE MODEL Once you have verified the settings please refer to the Axe 400 Ready To Fly manual for final set up and flying instructions Thanks yo...

Reviews: