11/68
7002985 300709.KET Release 06.06.2017
Hekatron Vertriebs GmbH · Brühlmatten 9 · D-79295 Sulzburg
3 Product description
3 Product description
3.1 SVG 522
The SVG 522 power supply unit with battery buffer (part no. 5400085.0201)
consists of the power supply board SVK 47 and a stable industrial housing
made of sheet steel and having degree of protection IP 54. The SVG 522
is of the wall-mounted type. An assembly kit for wall-mounting with lugs
(part no. 6100038) is available for individual assembly. Cable entries are provided
on the top side of the housing. Indicators for the power supply unit and optional
door control board TSK 03 as well as acknowledgement options are incorporated
in the keypad on the door front of the housing. Labelling fields can be exchanged
as desired. The SVG 522 version with TSK 03 (part no. 5400085-0210) already
features the installed and pre-wired door control board TSK 03.
The SVG 522 complies with the standards and directives EN 54-4 and VdS 2541
as well as the DIBt provisions and was primarily developed for use in hold-
open systems and path-bound conveying systems. It is intended for bat-
tery-buffered direct current supply of the door control boards TSK 03 and
FAK 01/FAD 01 according to standards. These door control boards are used to
supply and evaluate peripheral devices, such as smoke switches, electromag-
netic door retainers, light barriers, and signalling means.
The user has the option of installing either two hold-open system boards
FAK 01 or one door control board TSK 03 in the SVG 522.
Features:
The SVG 522 is characterised by the following features:
– Short-circuit-proof
– Primary clock pulses
– High efficiency
– Maintenance-free emergency power supply
– Audible and visual indication of power, battery and fuse failures as well as low
voltage and earth fault
– Potential-free changeover relay for power failure, low voltage and battery
failure
– Ready indicator
– Temperature-dependent trickle charge
– Batteries protected against total discharge
– Installation slot for door control board TSK 03 or 2 FAK 01
– DIBt approval for hold-open systems Z-6.5-1725
DIBt approval for path-bound conveying systems Z-6.5-1891
– VdS tested