20
| 9. Operation
9.3 Preventing
transmission of
alarms
If a radio smoke alarm detects a fire,
the signal is transmitted to the radio
network after about 20 seconds.
Within these 20 seconds, the
transmission and thus area-wide
alarm can be prevented as follows:
f
Press the test button on the
triggering smoke alarm.
Ö
The triggering smoke alarm
is muted.
Ö
The transmission of the alarm
is prevented.
9.4 Adding users to
the radio
network/replacing
smoke alarms
Single or several users can be added
to an existing radio network at a
later point in time.
The maximum number per
line is 30 users.
This procedure also applies for the
replacement of an existing smoke
alarm.
Requirements
The new users are prepared for
commissioning ( see chapters
"Project planning" and
“Assembly").
The new smoke alarms are
completely assembled in the base
and signal their readiness for
i
Summary of Contents for Standard X
Page 1: ...Operating manual Standard X radio module...
Page 2: ......