HEKA Elektronik EPC 10 USB, Hardware Manual, Page: 73 / 81

13. Appendix II: Probe Adapters
The pre-amplifiers of the EPC 10 patch clamp amplifiers are available with two different mounting plates for
mechanical connection of the pre-amplifier to e.g. various micromanipulator system:
13.1 Standard Mounting Plate
The probe is mounted on a 38 mm x 90 mm x 4 mm plate which has 4 wholes with 3 mm diameter. Since the
plate is wider than the probe, there is room for custom mounting wholes on both sides of the probe.
Figure 13.1: Adapterplate 1
13.2 Dovetail Mounting Plate
The dovetail adapter (order number: 895020) can be used to connect e.g. to Sutter MP 285 or HEKA MIM 4
micromanipulator. The dimensions of the dovetail match the probe housing.
Figure 13.2: Adapterplate 2